STOP
DON’T RETURN TO STORE!
PAGE 2 OF 2
FIGURE 2
FIGURE 3
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse
thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame parts.
• Wash glass with mild soap and water, rinse thoroughly,
and dry completely.
• Inspect and tighten all bolts and fasteners on a regular
basis to ensure proper performance and safety of your
table.
• When moving the table, remove the umbrella and lift.
Do not drag this table.
• We recommend the use of furniture covers when not
in use.
•
In order to prolong the life and beauty of your table, we
recommend that it be stored in a dry and protected
area during off season periods.
• Tempered glass has been used for increased strength
and safety of your table. However, during windy
conditions the umbrella should be lowered and/or
removed.
Step 2:
Fasten the supports (#2) into the plastic holders by
using screws (#6). See Figure 2.
Step 3:
Fasten the centre connector with ring (#4) and the
centre connector (#5) to the middle of the legs (#3)
and the supports (#2) by using bolts (#7), washers
(#8) and plastic nuts (#9). Make sure that all of the
bolts have been tightened completely and cover them
with bolt caps (#10). See Figure 3.
Step 4:
Turn the table to its upright position. See Figure 4.
Note:
To use an umbrella with this table, remove the plastic
centre plug and put the umbrella pole through the
table top and centre connector ring.
FIGURE 4
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: 1-877-539-7436
FAX: 1-877-539-7439
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
