background image

WELCOME

…to the Coustic Car Audio world of hard-hitting, high-quality mobile audio
products. The new Coustic XM6 electronic crossover utilize the industry's
most advanced sound engineering and manufacturing processes to offer the
highest quality electronic crossovers available on the market today.

Besides its sleek, contoured design, the new XM6 offers the latest comple-
mentary audio features. This booklet offers you a guided tour of all these
exciting benefits. For optimal sonic reproduction, please follow the installation
suggestions and recommendations as closely as possible. The time you
spend will prove to be worthwhile when you sit back and enjoy the high
fidelity music!

Whatever your needs for your ultimate car audio system, look to Coustic 
Car Audio – we have the fullest range of car audio components to meet the
most critical demands.

No part of this publication may be reproduced, stored in a retrieval system,
or transmitted in any form or by any means, electronically, mechanically, or
otherwise, without the prior written permission of Coustic or Mitek
Corporation.

Please take a moment to register your purchase on line at www.coustic.com.

Please also record the serial number of your crossover in the space provided
below and keep this manual for future reference, as well as your sales
receipt as proof of ownership. (The serial number of your crossover is marked
on the bottom of its metal chassis.) 

Serial Number: 

Date of Purchase: 

WWW.COUSTIC.COM

3

Summary of Contents for XM6
















Reviews: