OASIS COVER page-
21
FIGURE 16: DO NOT TIE FROM THE TOP OF THE CRATE
Always make a visual inspection of the condition of
the crate before attempting any action with the
forklift.
SECURE THE PERIMETER
Before or while handling the crate with the forklift or
any other lifting tool, the forks should be fully under
the crate before any elevation and should be moved
by one of the two short sides indicated on the crate.
No one should be in front, beside or around within 12'
(3.6 m) of the crate being handled. The crate should
not be kept higher than 6" (152 mm) from the ground
at all times to avoid injury to workers and helpers see
.
Make sure the forklift is stopped and the crate down
and stable on the floor before approaching the crate
for further handling or unpacking. If the crate seems
to be unbalanced, unstable, tilting or wobbly, do not
attempt any action in any circumstances to stabilize
by hand.
FIGURE 17: SECURE THE PERIMETER
UNPACKING PROCEDURE
1. Before unpacking the unit, make sure there is
no visible damage to the crate. In case of any
suspicious damage, take pictures first and
please
call
Covana
customer
service
immediately. Always stand the crate in the
vertical
position.
Make
sure
the
wind
conditions are safe enough when unpacking
the components.
2. Remove both cardboards see
FIGURE 18: REMOVAL OF THE CARDBOARDS
3. Hammer off the wood furring strips by hitting
on the inside of the side panels see
241146
OWNER'S MANUAL
REVISION 1
Summary of Contents for OASIS COVER
