Covaris
LE220 (-plus, R-plus, and Rsc) Setup & Instruction Manual
53
Part Number: 010398 Rev H | November 2019
Return to Other devices. Note that there is now a ‘USB Serial Port’ listed under the three ‘RF Controller’ lines. Right-click on
the ‘USB Serial Port’ and select ‘Update Driver Software…’, as shown in the image below. Repeat the installation steps shown above.
Return to Other devices and repeat this process in order (top to bottom), for the 3 remaining entries, until all Covaris device entries
have been assigned a COM number under Ports (COM & LPT). The ‘Device Manage’ window should now show:
Note that the ‘COM’ numbers will vary from computer to computer but should occupy four consecutive ports.
Launching SonoLab 8 for the first time
1.
Launch SonoLab 8 and
WAIT
for the message box to appear. It might take a couple of minutes to establish a database connection
for the first time.
2.
(DO NOT DOUBLE CLICK ON THE ICON THE SECOND TIME. THIS CAN CREATE MULTIPLE INSTANCES OF THE DATABASE AND
CAUSE CONNECTION ERRORS)
3.
Log in using the default user “Administrator, password “admin”. Both the user and password are case sensitive.
4.
SonoLab 8 starts.