22
TESTING SENSOR
CHANGING BATTERIES
To test a Carbon Monoxide Detector’s connection to the panel, tap Settings > Smoke >
Carbon Monoxide > (select sensor) > Edit > Test Sensor.
Carbon Monoxide Detectors require one CR123A battery. Twist the detector counter-
clockwise from its mounting base and remove the old battery. Wait 20 Seconds before
installing the new battery to ensure a proper power down. Insert the battery in the
compartment. Always match the + and - signs on the battery with the corresponding marks
on the sensor. Reinstall by mounting the sensor to the base with the small hole on the outside
edge of the sensor slightly offset to the left of the raised mark on the base and turning the
sensor clockwise. After replacing the batteries it is recommended that you test the sensor to
make sure it works properly.
ADDITIONAL INFORMATION
For more information, see the enclosed documents or visit www.covesmart.com/manuals
After replacing the batteries it is recommended
that you test the sensor to make sure it works properly.
Summary of Contents for 51000-307
