COVER serii NHS – User Manual
COMEX S.A.
7
Figure 2-2 Disassembly of the housing
Side protection should be removed. Unpacked UPS looks like the picture below.
Figure 2-3 View of the power supply after disassembly of the housing
Note: Remove the screw that connects the UPS enclosure to the wooden pallet, and then place the
power supply at the point of installation. Disassembly should be carried out carefully so as not to scratch
the housing.
Check the correctness of the delivered equipment on the label located on the back of the UPS door. The
label contains basic information about the model, power, etc.
Note: Dispose of materials after disassembly in accordance with local environmental protection
requirements.