Page 6
For technical questions, please call 1-888-866-5797.
Item 56184
4. Attach Corner Legs and Feet to the
four 3-Way Corner Connectors.
5. Attach Center Legs and Feet to the
two 4-Way Center Connectors.
NOTICE: To prevent damage to the material, make sure all hardware is installed
with Bolt facing cover and Nuts facing inside, away from cover.
6. Connect four Bottom Rails (9) between the
Center and Corner Legs using the Center
Clamps (11) and Corner Clamps (10).
a. For Center Legs: Place one Center Clamp (11)
on the front and one on the back of the
connection. Secure the Clamps using two
Bolts (12) and Nuts (14). Tighten.
Repeat for the other Center Leg.
b. For Corner Legs: Place one Corner Clamp (10)
on the front and one on the back of the
connection. Secure the Clamps using one
Bolt (12) and Nut (14). Tighten
Repeat for the other three Corner Legs.
Two Corner
Clamps (10)
Two Center
Clamps (11)
Nut
(14)
Nuts
(14)
Corner
Leg
Center
Leg
Bolt
(12)
Bolts
(12)
Corner
Leg &
Foot
Center
Leg &
Foot
9
9
9
9
3-Way
Corner
Connector
4-Way
Center
Connector
SAFETY
MAINTENANCE
ASSEMBL
Y