How to install filter
Please Check Before Use!
PREPARATIONS
The product is for 220 V – 240 V~ 50 Hz/60 Hz only.
Make sure to connect the power plug to a grounded
electric outlet (220 V – 240 V~ 50 Hz/60 Hz) dedicated to the product.
1. Open the front cover.
Open the front cover by pulling the
upper part of it.
2. Take out filters and remove
the plastic packing.
Remove the plastic packing of the filters
except the pre-filter and then install
filters according to the order of filters.
▶
▶
Tips
- Make sure to remove each filter’s plastic packing before installing filters.
- The product is for household use. Use the product indoors only.
- When the product is not in use, remove the power plug from the electric outlet.
- When installing filters, check that the front side of filters is in the correct direction.
▶
Order of filters : Pre-filter
→
A3
TM
medium filter
→
HEPA filter