How to Adjust the Sensitivity of the Pollution Sensor
ADJUST PARTICLE SENSOR
1. With the mood mode button pressed down,
insert the power plug in the electric outlet.
2. With a tone ringing twice, the current sensitivity
indicator of the sensor blinks.
3. Adjust the sensitivity by pressing the speed button.
The sensitivity of the sensor is displayed by ablinking
airflow speed indicator.
4. After adjustment, the sensitivity of the pollution
sensor is set when the power button is pressed to
turn the product off or automatically set when
20 seconds have passed in the setting mode.
When the product is shipped out, the pollution sensor is set to standard sensitivity. If the pollution level stays
at the highest level after 2 hours of operation or stays at the lowest level for more than 1 hour when the air
does not seem clean, users can adjust the sensitivity of the pollution sensor as follows.
Sensitive
Standard
Insensitive
Speed step 1
Speed step 2
Speed step 3