13
iAUDIO E2
+
Firmware Upgrade
Before you start!
Firmware is software that is embedded within the hardware.
Upgrading it can enhance system stability and provide additional
features.
The performance and usage of iAUDIO E2 may be changed
through the firmware without any prior notice, and slight malfunc-
tioning may occur in some firmware.
How to Upgrade the Firmware
1. Download the latest firmware from the SUPPORT section of the
website (http://www.COWON.com).
2. Use the simple USB connector to connect iAUDIO E2 to the PC.
3. Unzip the firmware file and copy it to the root folder of iAUDIO E2.
4. Perform ‘Safely remove the hardware’ function before
disconnecting the simple USB connector.
5. When you turn on iAUDIO E2, the firmware will be upgraded
automatically.
6. Turn on iAUDIO E2 again, and confirm that a music file can play
back normally.
- Fully charge the player before upgrading the firmware.
- Do not turn off the player before firmware upgrade is complete. It may damage
the product, and will void any warranty.
- Back up any important data before the firmware upgrade as any data stored on
the device may be deleted during the process. COWON accepts no liability for
any loss of data.
Summary of Contents for iAUDIO E2
Page 1: ...ver 1 4EN...
Page 5: ......