iAUDIO U3
32
In LineIn Rec mode, use the provided line-in cable to record sounds from other audio devices.
- Recording fi les can be located in “RECORD” (“VOICE” for voice records) of the top folder.
- To play a recording fi le using the browsing function, play the fi le in the Navigator in Digital AV mode.
- If you were in Record mode before turning the player off, the player will start with the Record mode when turned back on without
changing modes.
- When recording, battery consumption is higher than during normal operation, therefore fully charge the player before recording.
- Quality and capacity of recording may vary according to recording quality settings except for frequency status. 4. Advanced
Features by Menu - 8 See the Record section.
1. Use the line-in cable to connect the headphone jack of CDP with the Line-in jack of iAUDIO.
2. After the player is turned on, move to LineIn Rec mode.
3. Press the Play button on your CDP and then press the “REC”button on iAUDIO to start recording.
4. Pressing the “PLAY” button during recording will pause the recording and pressing the button again will
resume recording.
5. Press the “REC” button again to end recording.
6. To listen to recorded fi les, press the “PLAY” button after connecting your earphone.
CDP
Playback
Operation by Mode
4. LineIn Rec Mode (Recording with Line-in Cable)
