12
seaRChInG fOR YOUR CODe
IIf your home entertainment device does not respond
to the COX Custom DVR Universal Remote Control
after trying all the codes listed for your brand, or if your
brand is not listed at all, try searching for your code.
For example, to search for a code for your TV:
1.
Turn on your TV.
2.
On the remote control, press
TV
once;
Then press and hold
seTUP
until the
TV
key blinks twice, then release
seTUP
.
3.
Enter
9 - 9 - 1
. The
TV
key will blink twice.
4.
Aim the remote control at the TV and press
POWeR
once.
5.
Press
Ch+ (or Ch-)
one or more times and
stop when the TV turns off.
NOTE: In the search mode, the remote con-
trol will send IR codes from its library to the
selected
device, starting with the most popular code
first.
NOTE: If while pressing
Ch+
, and you inad-
vertently pass the code, press
Ch-
one or more
times until the TV turns on.
6.
Press
seTUP
once to lock in the code. The
TV
key will blink twice.
7.
To search for the codes of your other devices,
repeat steps 1 through 5, but substitute the
appropriate key (e.g.,
aUX
,
DVD
,
aUD
, or
Cable
) for the device you are searching for.
CheCKInG The CODes
If you have set up the Cox Universal Remote Control
using the
Searching For Your Code
procedure you
may need to find out which four-digit code is operating
your equipment. For example, to find out which code is
operating your TV:
1.
Turn on your TV.
2.
On the remote control, press
TV
once.
Then press and hold
seTUP
until the
TV
key blinks twice, then release
seTUP
.
M7820BP1.indd 12
3/13/2007 3:54:00 PM
