Cutout Dimensions
Cutout Measurements for CWD
Cutout Width - A
28-1/4" (71.8 cm)
Cutout Depth - B
23-1/2" (59.7 cm)
Cutout Height - C
9-1/2" (24.1 cm)
General Information:
•
When installing this unit directly below other units, we highly recommend that Coyote built-in
products are used.
•
Remove warming drawer carefully from carton. Remove all loose packaging and accessories.
•
It is the responsibility of the installer to comply with local codes. If no local codes are
applicable, wire in accordance with the National Electrical Code, AINSUNFPA 70 (latest
edition).
•
This appliance is not fused. Protect with a proper sized fuse or circuit breaker and a GFI.
•
Line disconnect switch, circuit breaker, GFI, or a plug/receptacle of power cord connection
should be readily accessible to the operator.
•
Ground unit per applicable electrical codes.
•
Any installation not matching the specifications discussed in these instructions will void
Coyote’s warranty.
