- 4 -
INSTALLING THE GLASS SHELF
■
Open the door. The glass shelf is packed underneath the Refrigerator
Basket.
■
Take the glass shelf out of the refrigerator and packaging.
■
Put the glass shelf onto the Protective Pads.
CHANGING THE DOOR’S SWING
The direction the door opens can be changed by placing the alternate upper
hinge (that came with the unit when purchased) on the alternate top corner. To
remove the upper hinge, you will need to remove the six screws on the Control
Panel to gain access to the hinge. In regards to the bottom hinge, you just
need to remove the three bolts that are holding this hinge to the refrigerator
and re-locate it to the new side. The bottom hinge is universal, while the top is
not. Place the hinges and door to your preference. Reinstall the Control Panel
and Hardware.
