Use and Care Manual
22/23
The massage chair is connected to the
power supply but is not functioning
1. Check to see that the plug is properly
connected and working
2. Ensure the massage chair switch is in
the ‘I’ position
Possible overheating due to prolonged
use. Turn off the power for at least 30 to
50 minutes
1. Ensure the chair is plugged into a
working outlet
2. Turn the power OFF and ON again
The remote control works but the
massage chair is not functioning.
Both the remote control and the
massage chair are not functioning
This product must be grounded. If it should malfunction or break down, grounding provides a
path of least resistance for the electric current to reduce the risk of electric shock. This product
is equipped with a cord with an equipment-grounding conductor and a grounding plug. The plug
must be plugged into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
Danger-Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or service technician if you provided with the
product-if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 120V circuit and has grounding plug that looks like that plug
illustrated below. Make sure that the product is connected to an outlet having the same
configuration as the plug. No adapter should be used with this product.
This massage chair is controlled by a microcomputer and is thus susceptible to power surges of
+10 to-15%. The following situations may arise in the event of a power surge:
If you continue to have problems, please read the warranty card and contact the COZZIA service
department.
GROUNDING INSTRUCTIONS
TROUBLESHOOTING
Wellness for Home
