Use and Care Manual
14/15
Connect to the power supply, and turn the switch to “I” position, chair is now in idle mode.
During its idle mode ON/OFF button will blink.
During its idle mode, only ON/OFF, Pause, Leg rest Recline/Restore, Chair Recline/Restore
buttons can be operated.
1. Restore the footrest to its original position.
2. Recline the chair to tilt approximately 45 degrees. Move the chair using the wheels as the
fulcrum.
Note:
•
Always return the footrest to its original length and restore it to its original position before
moving the chair, otherwise injury during movement may result.
•
Do not move the chair while a person is seated on it.
•
Place a mat on the floor and gently roll the chair over it to avoid damaging the floor.
MOVING THE CHAIR
OPERATION GUIDES
Wellness for Home
35
