Use and Care Manual
20/21
Swedish function Start/Stop Control Button – 5 levels of speed to be adjusted.
When mode 2 Kneading function is engaged, press this button to activate rhythmic mode 1
Swedish function for a full back massage at medium speed. Press this button again to activate
mode 2 Swedish function. Press once more to stop the Swedish function. To activate Swedish
function directly, press this button 3 times during idle mode.
21. SWEDISH
Rolling function Start/Stop Control Button – 3 levels of width to be adjusted
When mode 2 Clapping function is engaged, press this button to activate Rolling function for a
full back massage. Press this button again to stop the Rolling function. To activate Rolling
directly, press this button 3 times during idle mode.
Note:
This function cannot perform “Spot” massage function.
23. ROLLING
The Spot or Partial Back massage
Press this button once to activate localize Spot massage while the original massage mode
continues to run at the latest position. Press this button again to switch to Partial massage
function.
Note:
Partial Massage will take the latest position as the center to perform Partial Massage with
the distance approx. 8 cm.
24. SPOT/PARTIAL
The position adjustment button for spot and partial massage.
When the spot and partial massage function are activated, this button can be used to move the
massage rollers.
Hold this button to move the massage rollers upward/downward respectively. Release the
buttons when reaching desired position.
25/26. Upward/Downward adjustment
The Width Adjustment Button for Tapping, Clapping, Shiatsu and Rolling function.
When Tapping, Clapping, Shiatsu or Rolling function is engaged, every single press on this button
will change the massage width interval in the sequence of “Narrow > Medium >Wide” in cycle.
27. WIDTH
The Speed Adjustment Button for Tapping, Clapping, Swedish and Shiatsu function
When Tapping, Clapping, Swedish or Shiatsu function is engaged, every single press on this
button will change the massage speed interval in the sequence of “Lv1 > Lv2 > Lv3 >Lv4 >
Lv5” in cycle.
28. SPEED
The Strength Adjustment Button for Kneading function
When Kneading function is engaged, every single press on this button will change the massage
speed strength interval in the sequence of “Lv1 > Lv2 > Lv3 > Lv4 > Lv5” in cycle.
29. STRENGTH
Tapping function Start/Stop Control Button - 3 levels of width, 5 levels of speed to be adjusted.
Press this button to activate rhythmic mode 1 Tapping function for a full back massage at
medium speed. Press the button again to activate mode 2 Tapping function.
Press the button for the third time to stop Tapping function and switch to mode 1 Shiatsu
function.
22. TAPPING
Shiatsu function Start/Stop Control Button – 3 levels of width, 5 levels of speed to be adjusted.
When mode 2 Tapping function is engaged, press this button to activate rhythmic mode 1
Shiatsu function for a full back massage at medium speed. Press this button again to activate
mode 2 Shiatsu function. Press once more to stop the Shiatsu function. To activate Shiatsu
function directly, press this button 3 times during idle mode.
22. SHIATSU
Clapping function Start/Stop Control Button – 3 levels of width, 5 levels of speed to be adjusted
Press this button to activate rhythmic mode 1 Clapping function for a full back massage at
medium speed. Press the button again to activate mode 2 Clapping function.
Press the button for the third time to stop Clapping function and switch to Rolling function.
23. CLAPPING
Wellness for Home
