12
Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice.
Dimensions
See diagrams opposite
Weight
0.15kg
Supply Voltage
Min 11.5VDC max 36VDC, min
10VAC max 26.5VAC
Maximum Load
Channel 1 (switching):
EBDSPIR-DD-LV
Low voltage supply with relay
output rating 16A resistive 10A
inductive
EBDSPIR-DD-LV-GOLD
Low voltage with relay contact for
low on resistance suitable for
control wire applications 3A
resistive load. Not suitable for
inductive loads
EBDSPIR-DD-LV-OC
Low voltage supply with open
collector output, rating 50mA,
30VDC max
Channel 2 (dimming):
Maximum number of DSI or DALI
ballasts is 10 unless the relay is
disabled then it is 20.
Power consumption
On 627mW, Off 257mW
Dimming output
Basic insulation only. Although low
voltage, this is not an SELV output
and should be treated as if mains
potential. Use mains rated wiring.
Terminal Capacity
2.5mm
2
Temperature
-10ºC to 35ºC
Humidity
5 to 95% non-condensing
Material (casing)
Flame retardant ABS and PC/ABS
Type
Class 2
IP rating
IP40
Compliance
EMC-2004/108/EC
LVD-2006/95/EC
Technical data
Part numbers
C.P. Electronics Ltd
Brent Crescent
London
NW10 7XR
United Kingdom
Tel:
+ 44 (0) 333 900 0671
Fax:
+ 44 (0) 333 900 0674
www.cpelectronics.co.uk
enquiry@cpelectronics.co.uk
Ref: #WD488 Issue 3
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in
accordance with the latest edition of the IEE Wiring
Regulations and any applicable Building Regulations.
EBDSPIR-DD-LV
DBB
Part number
Description
Detector
EBDSPIR-DD-LV
Ceiling PIR presence/absence detector 12-24V AC/DC
EBDSPIR-DD-LV-GOLD Ceiling PIR presence/absence detector 12-24V AC/DC for low current
EBDSPIR-DD-LV-OC
Ceiling PIR presence/absence detector 12-24V AC/DC + open collector output
Accessories
DBB
Surface mounting box
UHS5
Programming IR handset
UNLCDHS
Universal LCD IR handset
