2
Instruction and Operation Manual
Misprints and technical changes reserved
About This Instruction Manual
If you look for some definite topic you can use the table of contents at the beginning of these
instruction and operation manual.
In these instructions is a row of symbols which shall provide you with a fast orientation and show
the importants.
This symbol stands for notes and useful informations which shall make the
operation easier for you.
Note, disregard can damage or destruct the chopper
Note, disregard means a danger for the operator.
1.
Instruction of Safety
Before you put the chopper into operation, please read this instruction and
operation manual completly.
The operation should only be done by qualified personnel.
The precautions and warnings below must be observed at the operation of the
chopper. The braking chopper instruction and operation manual do not replace
the manual of initial operation of the inverter.
1.1
Instructions and Rules
During installation, general installation regulations such as following should be observed
DIN VDE 0100
General requirements for the installation of power with mains
VDE 0113
General requirements for the installation of electrical equipment for
production and tooling machines
VDE 0160
Requirements for electronic equipment for use in electrical power
installations
VDE 0470
Part 1
International protection
1.2
Safety
Caution Danger !
Disconnect unit from mains and wait until the capacitors have discharged
before making any repairs. After the installation make sure that the unit
and motor is properly grounded in order to avoid electrical hazard.
