effigis.com
CPAT FLEX (DRV3 Lite)
7
6
User Manual
2. System Components
The DRV3 Lite is a portable dual-band signal leakage detection meter designed to operate as
a find-and-fix meter for all digital and hybrid cable networks.It can operate in “system mode”,
detecting leakage carriers produced from the DSG1 signal generator located at the head-end
location, in “pressure test” mode, detecting high-level carriers generated by the DSG1 Lite or
in “spectrum mode”, working as a simplified spectrum analyzer. The DRV3 Lite is frequency
agile from 118 to 140 MHz (Mid-band tuner, external antenna) and from 600 to 860 MHz
(LTE band tuner, internal antenna). It can easily be set up via its intuitive user interface.
This section describes the DRV3 Lite unit in detail including its accessories, feature set,
button usage, powering and data interfaces.
2.1 Initial Verification
Your DRV3 Lite unit is charged, calibrated, and ready to use right out of the box. Upon
delivery, visually inspect each item for any damage that may have occurred during shipping.
If you see any signs of physical damage, please contact Effigis:
• Callers from the U.S. and Canada can dial +1-888-495-6577 (toll-free number)
• International callers can dial +1-514-495-0018
If there are no apparent signs of physical damage, turn on the unit by pressing the button,
approximately three (3) seconds, and make sure the unit boots up properly.
Check that your package contains all ordered items. If you ordered the DRV3 Lite Portable
Leakage Detection Meter kit, the following items are included:
• DRV3 Lite meter, including its rechargeable battery pack
• Rubber duck antenna for mid-band measurement with SMA connector
• AC adapter
• User Manual
If any of the standard accessories are lost or damaged, you can order a replacement. Please
quote the following DRV3 Lite part numbers when ordering:
NOTE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy, and if it is not
installed and used in accordance with the instruction manual, it may cause
harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.
NOTE
Any modifications made to this device that are not approved by Effigis
Geo-Solutions Inc. may void the authority granted to the user by the FCC to
operate this equipment.
1.4 Technical Support
The Effigis Technical Support Service is available from Monday through Friday from 9:00 AM
to 5:00 PM Eastern Time.
Toll free from U.S. and Canada: + 1-888-495-6577
International: + 1-514-495-0018
Fax questions anytime to: + 1-514-495-4191
cpat@effigis.com
1.5 Calibration
Your DRV3 Lite unit has been calibrated and tested at the factory, and does not need further
calibration before use.
However, if the unit suffers damage or is repaired, it is recommended that the unit be tested
by an authorized Effigis service center.
As well, if your company requires regular calibration of all equipment, or requires a
calibration certificate for the DRV3 Lite, a calibration service is available through Effigis.
For more information on our calibration service, please contact your Effigis representative.
1.6 Effigis Website
The Effigis Web site contains product specifications, information, press releases, brochure
downloads and Frequently Asked Questions (FAQs). Please visit our Web site at:
effigis.com
.
