REMOTE OPERATION
~
61
~
8.2 IE Web Browser
You can view the images or operate your DVR with IE web browser.
Note: The supported PC operation systems are Windows 2000 and Windows XP and Vista
Step 1: Key in the IP address used by your DVR in the URL address box, such as 60.121.46.236, and press Enter.
You will be prompted to enter the user name and password to access the DVR.
If the port number your DVR used is NOT 80, you need to key in the port number additionally. The format is
ipaddress:portnum
. For example, for IP address 60.121.46.236 and port No. 888, please key
in ”http://60.121.46.236:888” into the URL address box, and press “Enter”.
Step 2: Enter the user name and password, the same as the ones used at AP login, and click “OK”. You will see a
similar screen as the following when the login information is correct.
Note: The buttons and functions described below are taking 4CH DVR model as an example.
NO.
Function
Description
1 Home
Click
to go to the main page of the DVR
2 Config.
Click
to go to the detailed DVR setting.
3 PTZ
Click
to enter the PTZ mode.
4 Channel
Selection
Click one of the number to switch to the channel you want to see in full screen.
5 Selection
Click
or
to go to the previous / next channel, or change setting.
:
Click to show 4-cut display.
6 Display
Mode
:
Click to display each channel one by one, starting from CH1. When the last channel is
displayed, it will start from CH1 again.
To exit from this display mode, press any other channel display button.
:
Click to enter the menu / exit the menu mode.
/
:
Move up / down to select the previous / next menu or sub-menu function, or change
the setting.
7
Menu and Arrow Keys
/ :
Move left / right to the previous / next sub-menu items.
8 Event
Click
to enter the playback search settings screen.
