Installation
Alio™ Note Card Reader
6
Published by CPI
44060-IG-01-01-EN_CPI_Alio Note Card Reader_Installation Guide_V1.0_.docx
3
Installation
This chapter
•
lists the card readers scope of delivery and the tools needed to install the card reader
•
shows how to identify a card reader unit
•
describes how to install the card reader
3.1
Parts included
The card reader comes with an
MDB cable (part no. 250670036C)
DEX cable (part no. 215637033C)
Mounting plate (part no. 250038091)
Hardware bag
•
4 machine thread fixing screws (part no. 203716001C)
•
1 thread-forming fixing screw (part no. 204306001C)
3.2
Tools required
Nut driver 11/32 in [9 mm]
Phillips head screw drivers PH 1, PH 2
Zip ties (optional)
Snips (optional)
PH1, PH2
3.3
Card reader identifier
The Alio Note card reader can be identified by its serial number on the product label. There are three optional positions for the product label:
Above the bezel, on the bottom side of the card reader, or on the bottom side of the card reader’s connection hub.
Fig. 1: Product label positions
