background image

 

 

CXB2 

Mexico 

13 

©  

 CPI 2016   

 

 

 

P/N# 253052002 

 

 

 

http://www.cranepi.com 

 

 

DISCLAIMER 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The information contained here-in is the property of Crane Payment Innovations and is not to be 
disclosed or used without the prior written permission of Crane Payment Innovations.  This copyright 
extends to all the media in which this information may be preserved including electronic, printout or 
visual display. 

Under no circumstances any part of this publication may be copied, transmitted, transcribed or 
distributed in any form or by any means, or stored in a database or retrieval system, or translated into 
any language (natural or computer) without the prior written permission of Crane Payment Innovations. 

Crane Payment Innovations reserves the right to change the product specifications at any time. Also, 
Crane Payment Innovations disclaims any liability for any direct or indirect losses arising out of use or 
reliance on this information. This information is for guidance only. 

For any inquiries please contact us at MEI Technical Support 1-800-345-8172. 

http://www.cranepi.com 

Summary of Contents for CXB2














Reviews: