CXB2
Mexico
9
©
CPI 2016
P/N# 253052002
http://www.cranepi.com
CHECK LIST
If a problem occurs:
Please check the following:
Unit is dead (won’t power up).
1.
Harness(es) maybe loose, not properly
connected, or have bent pins.
2.
Check source voltage to ensure that
power is being supplied to the note
validator.
Steady ON Red (2 chevron bars) = (Comm
disabled from mech/VMC).
Note:
Refer to the diagnostics chart on page 9
and to figure 7.
1.
Must have product in the vending
machine. Check coin changer to ensure
the coin tubes have coins and the coin
changer is working properly. Check
vending machine controller (VMC) for
proper setup.
Steady ON Blue (1 chevron bar) = all
denominations disabled by the VMC.
1.
Check vending machine controller
(VMC) for proper setup.
