Page - 15
SALES + SERVICE
CPIGP8AOPINST
(866) 912-3469
WWW.CPISHINE.COM
ORDINARY MAINTENANCE
To perform any maintenance on Stem shine – the Glass Polisher, the machine must be turned off and
disconnected from the socket. The appropriate t
ooling must be used t ogether with indiv idual
protection, according to the applicable laws.
Ordinary maintenance consists of cleaning the glass polisher on a regular basis with detergents;
vacuuming the interior chamber of the machine to remove lint and dust; and replacing the brushes on
an annual basis.
DO NOT IMMERSE THE MACHINE IN WATER.
The control panel is particularly
sensitive to humidity: if it gets inside the panel, it can short circuit the electronic board.
The electric cable must be chec ked meticulously at least once a week, using an extra lamp, to make
sure that it has no scratches (even small ones) and does not present irregularities.
MONTHLY CLEANING
On a monthly basis, the GP8 side panel should be removed and the interior of the machine should be
vacuumed clean
.
1. Ensure the unit is turned off and disconnected from the power.
2. Using a slot head screw driver remove the four screws that attach the side panel to the
machine.
3. Using a shop vac, vacuum the interior of the machine to remove any dust or lint from the fan
and motor. Once completed, reassemble the side panel.
If maintenance must be carried out in a poorly lit area,
always employ an extra lamp to ensure that the work is
executed under safe conditions according to local law
requirements
The above picture is an extreme example
of a unit that was not maintained
Summary of Contents for GP8
Page 19: ...Update 07 10 09 Page 20 ...
Page 20: ...Update 07 10 09 Page 21 ...
