EXCITER COIL INSPECTION
Disconnect the black / red wire of A. C.
G.
Check the black / red and earth wire for
continuity.
STANDARD: 300
Ω
∼
1. K
Ω
(
20
℃
)
PLUSER COIL INSPECTION
Disconnect the blue / yellow wire of A. C.
G.
Check the blue / yellow wire and green
wire for continuity.
STANDARD: 40
∼
300
Ω
( 20
℃
)
IGNITION TIMING INSPECTION
Check the ignition timing by using a
timing light after warm up the engine.
STANDARD:
BTDC :13
° ±
1
°
(
1700
±
100rpm
)
START MOROTR
START MORTOR INSPECTION
Connect a battery (
12 V
) to the motor.
Check the performance of the motor.
NOTE :
Use a fully charged battery.
文件使用
"pdfFactory"
试用版本创建
Downloaded
from
www.ScooterTime.net
