CHPA SERIES
D
OC
.01023245
R
EV
.L
THIS
DOCUMENT
IS
THE
PROPERTY
OF
COMMUNICATIONS
&
POWER
INDUSTRIES.
REPRODUCTION
OR
RELEASE
WITHOUT
EXPRESS
PERMISSION
IS
STRICTLY
PROHIBITED
5-11
5.15 Exiting A Menu
The user may return from any category to the selected meter display by pressing the buttons on
either Line 3 or Line 4.
5.16 Data Entry Rules
Numerical data will not take effect until the user has pressed the ENTER button. Arrow key
data entry will update when the arrow keys are pressed. The Quick Access Codes are the only
exceptions to these rules.
Numerical entries will indicate their present value until the user enters a new value.
Starting from the meter display on Lines 3 and 4, categories are accessible in the order specified
in Table 5-1, starting with RF Control. Press the MENU button to scroll through the available
categories. While in any menu category, press either the Line 3 or Line 4 buttons to return to the
selected meter displays. Appendix B describes each category in detail.
Table 5-1. Front Panel Categories
Category Name
Purpose
RF Control
RF Output Setting
Attenuator Setting
RF Power Mode
RF Inhibit
RF Display (W, dBW, dBm)
Suppress Peak Mode (disables RF peak mode
metering)
Linearizer Control (optional)
Gain
Phase
Amplitude
RF Trip Limits/Switch Port Relay Settings
High RF Alarm
High RF Fault
Low RF Alarm
Low RF Fault
High Reflected RF Fault
Low RF Relay Preference
Fault Relay Preference
Fault Log
Factory Authorized Access Code