MAINTENANCE / PARTS LIST
8
Filter Element Cleaning:
After each use it will be necessary to clean the filter element contained in the
Clear Bowl.
Clean as follows:
1. Make sure air hose is disconnected and air pressure on gauge reads zero.
If pressure exists, turn
PURGE
/
FLUSH
valve to
PURGE
position. This will
vent the air pressure in the flush tank.
2. Unscrew bowl from filter housing.
3. Remove cylindrical filter. Clean filter element with clean solvent or blow out
with shop air.
4. Reinstall filter element and secure by screwing clear bowl back onto the filter
housing.
Check the universal flush clamp for worn seals. Check hoses for worn seals.
THE FOLLOWING ARE SERVICEABLE PARTS FOR THE AFM100 UNIT:
CPS Part Number
Description
AFMXH
Flush hose with 3/8 female SAE swivel connection
AFMXHS
Flush hose rubber seal, set of 2
AFMXF
Replacement cylindrical filters
AFMXC
Replacement universal clamp complete
AFMXCS
Replacement universal clamp rubber seal
AFMXR
Replacement Refill Cap
THE FOLLOWING ARE PART NUMBERS FOR THE CPS SUPER FLUSH
CPS Part Number
Description
AFMSF
One gallon can of CPS Super Flush
AFMSFC
One case 4-One gallon cans of CPS Super Flush
