2
KEYPAD
H. ON/OFF
I. Memory/Mode
J. Scroll
K. Reset- zero out torque values
L. Next entry and display light
DISPLAY
A. Preset torque value
B. Real time torque value
C. Available torque units
D. Factory presets 1-5
User-defined 6-10
E. Battery indicator
F. Peak vs. Track mode
G. Minus (counter rotation
N.m
lbf.in
lbf.ft
kgf.m
M
P T
A
C
B
D
G
F
E
K
H
J
I
L
CONTROLS AND FEATURES
BATTERY INSTALLATION
1.
Unscrew black battery cap counter-clockwise.
2.
Insert 2 AAA batteries included.(Insert positive
side (+) inward).
3.
Re-install battery cover.
POWER ON/OFF
1.
Press
[ ]
to turn wrench ON. Start-up display
will appear.
2.
Press
[ ]
again to turn OFF.
DISPLAY LIGHT
1. Press
[
]
to turn ON.
2.
Press
[
]
again to turn OFF.
SELECT TORQUE UNITS
1.
To select 1 of 4 units;
lbf.ft
,
lbf.in
,
kgf.m
, or
N-m
press
[M]
until unit appears at RIGHT of display.
2.
Press
[+]
until desired unit is found.
3.
To select torque value shown, wait 3 seconds
or more, or press
[M]
which will enter last unit
shown and move to auto-off feature.
4.
You are now ready to work.
SET UP/QUICK START
SET UP
SPECIFICATIONS
Positions 6-10 available for custom torque values
Model
BTLDTW
Units
(Selectable)
N-m
Kgf.m
Lbf.ft
Lbf.in
Measurement
Range
8-85
1-8
6-63
71-752
Accuracy
± 2%（clockwise / counter-clockwise of
reading, (10% to 100% of full scale)（
Resolution
0.1
N-m 0.1 Kgf.m
0.1
Lbf.ft
1.0
Lbf.in
Jaw Opening
3/16¨ – 1-3/8¨ (5 - 35 mm)
Operating
Voltage
3V (2 x AAA batteries, supplied)
Operating
Temperature
32
ºF
~104
ºF
(
0
º
C ~ 40
º
C)
Storage
Temperature
-4
ºF
~113
ºF
（
(-20
º
C ~ 45
º
C)
Humidity
Up to 60% non-condensing
Wrench (+
Case) Weight
2.79 lbs (1.27 kg)
Wrench
Length
15.25¨ (0.387 m)
Memory#
Factory Presets
Nut Size
Tube Size
1
Lbf.ft
14
5/8
¨
, 11/16
¨
1/4¨, 5/16¨
Lbf.in
168
N-m
18
17mm
1/4¨
Kgf.m
1.8
2
Lbf.ft
30
13/16¨
3/8¨
Lbf.in
360
N-m
42
22mm
3/8¨
Kgf.m
4.2
3
Lbf.ft
40
15/16¨
1/2¨
Lbf.in
480
N-m
54
24mm
1/2¨
Kgf.m
5.5
4
Lbf.ft
48
1-1/16¨
5/8¨
Lbf.in
576
N-m
55
26mm
1/2¨
Kgf.m
5.6
5
Lbf.ft
59
1-5/16¨
3/4¨
Lbf.in
708
N-m
65
27mm, 29mm
5/8¨
Kgf.m
6.6
AUTO-OFF POWER
1.
To conserve battery power, display (and display
light, if turned on) is factory set to turn off after
5 minutes of inactivity. Display can be set to
turn off after 15 minutes of inactivity or to run
continuously.
2.
To select auto-off after 5 or 15 minutes
or to remove factory auto-off feature, (run
continuously), press the power key if display is
not already on.
3.
Press and release
[M]
until
5, 15
or
OFF
appears
in the display.
4.
To select
5
[minutes],
15
[minutes] or
OFF
, press
[
+
]
until desired value appears in the display.
5.
Wait 3 seconds (or longer), or press
[M]
before 3
seconds to enter last value shown.
SELECT TRACK OR PEAK MODE
1. Default mode is “T” (Track), which shows “real
time” torque values in the
B
display
. Once torque
removed, display returns to 0.
2. To select PEAK MODE (P), press
[M]
then
[
+
]
to change from “T” to “P”. In PEAK MODE, the
maximum torque value reached will be shown on
the
B display
for 2 seconds. After 2 seconds, this
value will continuously flash in the
B display
(as a
reminder of the maximum value thus far).
3. To eliminate PEAK (P) value shown, press
[
]
.
SELECT A FACTORY TARGET TORQUE
SETTING
1.
Wrench is factory programmed with five presets
(memory #’s 1-5) for all 4 units:
Lbf.ft, Lbf.in,
N-m, Kgf.m.
(see page 5)
2.
Press to turn wrench ON.
3.
Press
[
+
]
to select a memory storage number
(M1, M2, M3, M4 or M5).
ENTER CUSTOM TORQUE VALUES
1.
To enter your own custom torque value (using
Memory #’s M6-M0), press 0 to turn wrench ON.
2.
Press
[
+
]
to select a memory storage number.
3.
Press and hold
[
+
]
until shows on the
display. Current torque value will appear and the
first digit will flash.
4.
Press
[
+
]
to scroll to desired number.
5.
Press
[
]
to go to next digit. Use
[
+
]
to scroll
to desired number. Repeat this process until
required digits have been accessed.
6.
Once desired torque value is entered, press
[M]
.
NOTE:
Erro
will show in the display if torque value you entered is
less than minimum torque of 10% full scale or greater than maximum
torque value, as shown in above specifications table (Measurement
Range) for actual torque value you have selected.
