PART NO.
BP2592-00-0001
SERIAL NUMBER
TITLE
INSTRUCTION MANUAL - BP2592
7313 SW TECH CENTER DRIVE
PORTLAND, OR 97223 USA
PH: (503) 598-9595 FAX: (503) 682-8164
WWW.CPSHV.COM
SHEET
3
REV
A
SPECIFICATION NO.
BP2592-89-0001
FSCM NO.
31640
SIZE
A
1. Safety:
OPERATIONAL SAFETY
THIS POWER SUPPLY GENERATES VOLTAGES THAT ARE DANGEROUS AND MAY BE
FATAL. OBSERVE EXTREME CAUTION WHEN WORKING WITH THIS EQUIPMENT.
High voltage power supplies must always be grounded.
Do not touch connections unless equipment is off and the capacitances of both the load and
power supply are discharged.
Do not ground yourself or work under wet or damp conditions.
SERVICING SAFETY
Maintenance may require removing the instrument cover with the power on.
Servicing should only be done by qualified personnel aware of the electrical hazards.
“WARNING” notes in the text call attention to hazards in the operation of these units that could
lead to possible injury or death.
“CAUTION” notes in the text indicate procedures to be followed to avoid possible damage to
equipment.
Technical and safety assistance can be obtained from:
Frank
Feng
7313
SW
Tech
Center
Dr
Portland,
OR
97224,
USA
Phone: 503-598
9595
Fax:
503-684-8164
e-mail:
frank@cpshv.com
WARNING
IF THE EQUIPMENT IS USED IN ANY MANNER NOT SPECIFIED BY THE CPS, INC.
(MANUFACTURER), THE PROTECTION PROVIDED IN THE POWER SUPPLY MAY BE
IMPAIRED CAUSING EQUIPMENT DAMAGE.
