6.1
【
Power On / Off
】
To turn the radio on or off, press and hold the power on
〔
〕
key .
6.2
【
Volume
】
Adjust the volume level by using
〔
〕
key (16 steps, default 8)
6.3
【
Transmission
】
Press and hold the
〔
〕
key while speaking at about 5cm from the microphone for
transmission. Release the
〔
〕
key to return to standby mode.
6.4
【
Reception
】
Listen for activity on the selected channel.
6.5
【
Key Lock
】
Press
〔
〕
key and
〔
〕
key simultaneously to select Key Lock ON / OFF
6.6
【
Channel Selection
】
Press
〔
〕
key and
〔
〕
until “** CH” is blinking, to select the channel number by pressing
〔
〕
key and confirm It by pressing
〔
〕
key . To select channel quickly, press and
hold the
〔
〕
key.
6.7
【
CTCSS / DCS
】
During setting, to press the
〔
〕
key until “CTCSS / DCS***” is blinking, to select the CTCSS /DCS
number by pressing
〔
〕
key and confirm it by pressing
〔
〕
key.
6.8
【
Scan
】
During setting, to press the
〔
〕
key until “SC***” is blinking, to select the scanning ON/OFF
by pressing
〔
〕
key and confirm it by pressing
〔
〕
key. to cancel the scanning by
pressing
〔
〕
key.
6.9
【
Power Selection
】
During setting, to press the
〔
〕
key until “Po***” is blinking, to selectpower HI/Lo by
pressing
〔
〕
key and confirm it by pressing
〔
〕
Key.
6.10
【
Intelligent ear-mic adjustment
】
When plug in ear microphone, the device will automatically reset the volume to comfort level
( originally set by factory or by user whichever the lower )
6.
OPERATION
EN
G
LI
SH
