3. If dry grinding, you will need to do the following: Locate vacuum
and dust interceptor to location of grind. Hook hose up to join vacuum
and dust interceptor. Run your machine hose to dust interceptor.
4. A propane tank was included with delivery of your G-250XTP. This
tank is a VAPOR-DRAW tank. When filling your tank make sure that it
is only filled to 80%.
IT IS RECOMMENED TO
ONLY USE PROPANE TANKS
PURCHASED THROUGH CPS.
THE MACHINE CAN ONLY
RUN ON VAPOR-DRAW. USE
OF A LIQUID-DRAW TANK
WILL CAUSE THE MACHINE TO
MALFUNCTION.
5. Tightly connect the brass fitting of the propane hose to valve on
top of the propane tank, and turn the knob to open the valve on the
propane tank.
WARNING: Be certain that you check all hoses for cracks
and leaks. Propane is an odorless gas with a sulfur additive. If you
recognize a strong odor, immediatley turn off valve on propane tank
and contact CPS.
6. Clear your work area. Before you begin your job, walk the area and
clear all debris. Injuries may occur from debris that is projected into
the air by impact. Projected debris can cause injuries to operators,
co-workers, and property.
*
NOTES
PREPARING THE MACHINE
24/7 Technical Support- Toll Free 1-877-472-8200
15
Concrete Polishing Solutions- G-250XTP Operator’s Manual
