Steri-Lamp user guide
Name of parts:
1. lamp shade
2. UV lamp
3. Power Plug
4. touch button
5. Base
Operating Information:
•
When power is on, the working indicator is red.
•
When you press the power button, the working indicator is green.
•
Timer indicator is blue.
•
During the starting procedure, the green light indicator will flash in 10 seconds, giving
the person using it time to leave the room.
•
During the sterilization procedure the working indicator is in green, timer is in blue.
•
After sterilization, the working indicator will be red.
•
The bulb can work for over 8,000 hours
Timer Options:
15 minute mode: Suitable for small spaces such as bathrooms, kitchens, closets, office, etc.
30 minute mode: Applicable for disinfection less than 40 square meters of face.
60 minute mode: Applicable for more than 40 square meters of space.
Remote Control Instruction:
•
Remote control works within 30 meters wireless
(~98 FT).
•
Remote has the same on/off and timer buttons.
•
Once you choose your timer setting, after 10 seconds it will turn on automatically.
•
The lamp is still what will light up not the remote.
Human Detection Instruction:
•
This product has a 360 degree human-body detection design, while working, it will automatically stop once it
senses a human or animal. Once it senses there is no physical body there anymore it will start working again
after a 10 second countdown.
•
The detection does not work in the first 30 seconds you start sterilization. After the 10 second warning the
operator needs to leave the room. If you have to re-enter, you need to wait 1 minute and then enter so it will
sense you.
•
It can sense humans and large animals. It will not sense small animals like mice, bugs, etc.
Caution:
•
DO NOT look at the ultraviolet light source directly, this product should not be on with people, animals, or
plants in the room. UV light can cause stigmata tired eyes, or conjunctive irritation.
•
Keep dust and spray away from the bulb.
•
You might find some white dust or small crystal inside the bulb tube after the lamp working for several times,
this situation is common. The dust or crystal is a kind of oxide of the material when power tum on, and it
would not influence the function at all
