Step 4 - Aligning Slide Plate to Alignment Plate
Step 5 - Inserting Alignment Pin
Now line up both Alignment
Plate and Slide Plate matching
center line on each piece.
Insert Alignment Pin through
the Alignment Plate and seat
into the center line notch of the
Slide Plate.
Carefully place the Centering
Tool over both the Centering
Pins and Centering Bit to square
the entire tool with your router
table and the bit at the correct
distance.
Tip: Clamp or tape plates
to your router table to prevent
movement while mounting.
Step 6 - Centering Circle Guide onto Router Table
Starting from one side of the
Slide Plate, slide the Alignment
Plate so that the Slide Plate
Brackets are fully positioned
into the groove of the
Alignment Plate.
Summary of Contents for CPRT-104
Page 10: ......
