Align bracket to the center line
of the Slide Plate and attach to
the front edge of the router
table. Note: Make sure the
bracket is at or slightly below
the table top surface. Insert the
small bolt through the lock
down channel of Slide Plate and
the slot in metal bracket, secure
with lock down bolt and
bushing if necessary.
Step 8 Option A - Attaching Slide Plate - USING BOLTS
Step 8 Option B - Attaching Slide Plate - USING MOUNTING BRACKETS
Using a 5/16 drill bit, drill a hole
through the center of the lock
down channel of Slide Plate
closet to the front edge of the
router table and in alignment
with the center line on the Slide
Plate. Insert Slide Plate Lock
down bolt through the lock
down channel of Slide Plate and
the hole in the router table,
secure with the Lock Down
knob.
Summary of Contents for CPRT-104
Page 10: ......
