1550 Inst
Issue 6 05/09/06
21
Effect of Cutter Height – Cutter Too High
Should the cutter be too high, the following will occur:
The machine will remove too much material from the edge being polished. This will
leave the polished material above the outfeed track level.
Diagram 17. Cutter Too High Diagram A
As the polishing continues the unsupported material starts to fall onto the outfeed
track.
Diagram 18. Cutter Too High Position B
As the material falls the cutter leaves marks along the edge of the piece being
polished at random intervals.
Diagram 19. Cutter Too High Position C