1550 Inst
Issue 6 05/09/06
6
5. Electrical Supply & Connection
The electrical specification of your new machine is as follows:-
Voltage
240V AC 50Hz (standard)
220V AC 60Hz (North America)
Current (max)
7.75A / 9.13A
Watts (max)
1860W / 2000W
Electrical supply to the machine must be in accordance with the details shown on the
rating label. As the colours of the wires in this mains lead may not correspond with
the coloured markings identified in your plug appliance, should the plug need to be
changed proceed as follows:-
Standard Specification
The wire which is coloured green and yellow must be connected to the terminal
which is marked with the letter E or by the earth symbol or coloured green and
yellow or green.
The wire which is coloured blue must be connected to the terminal which is marked
with the letter N or coloured blue or black.
The wire which is coloured brown must be connected to the terminal which is
marked with the letter L or coloured brown or red.
North American Specification
The wire which is coloured green must be connected to the terminal which is marked
with the letter E or by the earth symbol or coloured green and yellow or green.
The wires which are coloured black and white must be connected to the silver
coloured terminals. Polarity is unimportant.
!!IMPORTANT!!
THIS EQUIPMENT IS FITTED WITH FILTERING TO COMPLY WITH
ELECTROMAGNETIC LEGISLATION. THESE FILTERS WILL BE DESTROYED BY
FLASH TESTING. SHOULD A FLASH TEST BE CARRIED OUT ON THIS EQUIPMENT
DISCONNECT MAINS FILTER BEFORE PROCEEDING
Should there be any queries regarding the electrical requirements of the 1550
please refer back to the manufacturer or their nominated distributor.
