background image

 

2

 
 
 
 

 

TABLE OF CONTENTS 

 

General Safety Instructions for Machines ............................................................... 3 

Specific Safety Instructions ..................................................................................... 4 

CT171 Features ...................................................................................................... 5 

Physical Features ................................................................................................... 6 

Proper Grounding ................................................................................................... 7 

Un-Packing ............................................................................................................. 8 

Grinding Wheel ....................................................................................................... 8 

Grinding Surface ..................................................................................................... 8 

Test Run ................................................................................................................. 9 

Water Reservoir ...................................................................................................... 9 

Universal Support ................................................................................................... 10 

Grinding with the Rotation of the Wheel.................................................................. 10 

Grinding Against the Rotation of the Wheel ............................................................ 10 

Angle Guide ............................................................................................................ 11 

Honing Compound .................................................................................................. 11 

Replacing the Grinding Wheel ................................................................................ 12 

Parts Breakdown.....................................................................................................13 

Parts List................................................................................................................. 14 

Warranty ................................................................................................................. 15 

 

 

Summary of Contents for CT171
















Reviews: