9
ASSEMBLY
Attach the upper support leg to the lower
support leg using the connecting board,
screws and washers provided. See figure-3
Figure-3 Assembling the leg
Put the main housing upside down on the
floor and attach the support leg to the main
housing, securing it with the help of screws
and washers provided. Install the wheels at
the bottom of each support leg as shown in
figure-4.
Figure-4 Installing the legs
Now, turn the main housing and the support
legs up right. Place the collector body on
the floor and place the gasket provided on
the collector rim as shown in figure-5.
Figure- 5 Putting the gasket on the collector
rim
Attach the collector body to the main
housing and secure it using the screws and
washers provided. See figure-6
Figure- 6 Installing the collector