Craftex CX901, User Manual

6

UNPACKING 

The tool is properly packaged and shipped 
in a box. When unpacking, carefully inspect 
that the nailer has not been damaged 
during transit. 
 
 

INVENTORY 

A. 2" Brad Nailer --------------------------------  1 

B. Carrying Case -------------------------------- 1 

C. Safety Goggles ------------------------------  1 

D. Bottle for Oil ----------------------------------  1 

E. Hex Wrenches -------------------------------- 2 

Figure-1 Inventory 

SAFETY NOSE 
MECHANISM 

The CX901 features a safetu nose 
mechanism which protects against 
accidental firing. When the trigger is 
pressed, the nailer will not fire until the 
safety nose mechanism is depressed. 
 
Before using the nailer for the first time, 
check the safety nose mechanism to 
ensure proper function and safe use. 
 
To check the safety nose mechanism: 
 
Make sure the nailer is disconnected from 
the air supply. 
 
Make sure the magazine is empty. 
 
Make sure the trigger and the safety nose 
mechanism move up and down without 
sticking.  
 
Connect the nailer to the air supply. 
 
Without pressing the trigger, depress the 
safety nose mechanism against a scrap 
piece of wood that is clean and free of any 
knots, nails, or other foreign objects. 
 
 



  If the nailer does not fire, the safety 

nose mechanism is working. 



  If the nailer does fire, the safety nose 

mechanism is not working. 
Disconnect the air supply to the 
nailer and do not use the nailer until 
the safety nose mechanism is fixed. 

 
 
Keep the nailer with its nose mechanism on 
the scrap wood and now, pull the trigger 
and the nailer should fire.