background image

11

• When your battery pack becomes 

fully charged, the red light will turn 
OFF and the green light will turn ON.

• A minimum charge time of 1-1/2 

hours is required to recharge a
completely discharged battery.

• The battery pack will become slightly 

warm to the touch while charging. 
This is normal and does not indicate 
a problem.

Do not

 place charger in an area of 

extreme heat or cold. It will work 
best at normal room temperature.

• When the batteries become fully 

charged, unplug your charger from 
power supply and remove the bat-
tery pack.

LED FUNCTION OF CHARGER

LED WILL BE LIGHTED TO
INDICATE STATUS OF CHARGER 
AND BATTERY PACK:

• Red LED Lighted = Fast Charging 

Mode.

• Green LED Lighted = Fully Charged 

and Slow Charging to Maintain
Battery Pack.

• Red LED Flashing = Hot Or Deeply 

Discharged Battery Pack. Also 
Defective Battery Pack After1 Hour.

• Yellow LED Lighted and Red LED 

Flashing = Defective Battery Pack.

A.

Defective Battery Indicator Light

B.

Charging Indicator Light

C.

Ready Indicator Light

IMPORTANT INFORMATION FOR 
RECHARGING HOT BATTERIES

Under lengthy continuous use, the bat-
teries in your battery pack will become 
hot. You should let a hot battery pack 
cool down for approximately 1 hour 
before attempting to recharge. When 
the battery pack becomes discharged 
and is hot, this will cause the red light 
on your battery charger to flash. When 
the battery pack cools down, red light 
will glow continuously indicating fast 
charging mode, 1 hour charge time. 
Once the battery pack cools down, it 
will recharge battery pack in fast
charging mode as normal.

Figure 7: Indicator Lights

Summary of Contents for - 1/2" AIR IMPACT WRENCH 919983
















Reviews: