background image

6

Important Rules for Battery 
Tools

Battery tools do not have to be 
plugged into an electrical outlet; 
therefore, they are always in 
operating condition. Be aware of 
possible hazards when not 
using your battery tool or when 
changing accessories.

 Following 

this rule will reduce the risk of 
electric shock, fire, or serious 
personal injury.

Do not place battery tools or 
their batteries near fire or heat. 
They may explode.

 Following this 

rule will reduce the risk of electric 
shock, fire, or serious personal 
injury.

Do not charge battery tool in a 
damp or wet location.

 Following 

this rule will reduce the risk of 
electric shock, fire, or serious 
personal injury.

Your battery tool should be 
charged in a location where the 
temperature is more than 50°F 
but less than 100°F. 

Following 

this rule will reduce the risk of 
electric shock, fire, or serious 
personal injury.

Under extreme usage or 
temperature conditions, battery 
leakage may occur. If liquid 
comes in contact with your skin, 
wash immediately with soap and 
water, then neutralize with 
lemon juice or vinegar, If liquid 
gets into your eyes, flush them 
with clean water for at least 10 
minutes, then seek immediate 
medical attention. 

Following this 

rule will reduce the risk of serious 
personal injury.

Important Safety Instructions 
For Charger 

Save these instructions. This 
manual contains important 
safety and operating 
Instructions for battery charger 
part number 9-11040 
(981399-001).

Following this rule will reduce the 
risk of electric shock, fire, or 
serious personal injury.

Before using battery charger, 
read all instructions and 
cautionary markings in this 
manual, on battery charger, and 
product using battery charger. 

Following this rule will reduce the 
risk of electric shock, fire, or 
serious personal injury.

To reduce risk of injury, charge 
only nickel-cadmium and nickel 
metal hydride type recharge 
able batteries. Other types of 
batteries may burst causing 
personal injury and damage.

 

Following this rule will reduce the 
risk of electric shock, fire, or 
serious personal injury.

Do not expose charger to rain or 
snow.

 Following this rule will 

reduce the risk of electric shock, 
fire, or serious personal injury.

Use of an attachment not 
recommended or sold by the 
battery charger manufacturer 
may result in a risk of fire, 
electric shock, or injury to 
persons. 

Following this rule will 

reduce the risk of electric shock, 
fire, or serious personal injury.

To reduce risk of damage to 
charger body and cord, pull by 
charger plug rather than cord 
when disconnecting charger. 

Following this rule will reduce the 
risk of electric shock, fire, or 
serious personal injury.

Make sure cord is located so 
that it will not be stepped on, 
tripped over, or otherwise 
subjected to damage or stress. 

Following this rule will reduce the 
risk of serious personal injury.

An extension cord should not be 
used unless absolutely necessary. 
Use of improper extension cord 
could result in a risk of fire and 
electric shock. If extension cord 
must be used, make sure:

Summary of Contents for - 1/2" AIR IMPACT WRENCH 919983
















Reviews: