background image

 English

SYMBOLS

SYMBOL

SIGNAL

MEANING

DANGER

Indicates an imminently hazardous situation, which, if not avoided, 
will result in death or serious injury.

WARNING

Indicates a potentially hazardous situation, which, if not avoided, 
could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation, which, if not avoided, 
may result in minor or moderate injury.

CAUTION

(Without Safety Alert Symbol) Indicates a situation that may result 
in property damage.

The following signal words and meanings are intended to explain the levels of risk associated with this 
product.

SYMBOL

NAME

DESIGNATION/EXPLANATION

Read The Operator’s Manual

To reduce the risk of injury user must read and understand 
operator’s manual before using this product.

Eye and Head Protection

Always wear eye protection with side shields that are 
marked to comply with ANSI Z87.1

Sharp Blade

Thrown objects can ricochet and result in personal injury or 
property damage.

                                     Danger

Danger – Keep hands and feet away from blade.

Operating on a slope

Do not mow slope that has an angle of greater than 15°.

Keep Bystanders Away

Keep all bystanders at least 50 ft. away.

Some of the following symbols may be used on this product. Please study them and learn their meaning. 
Proper interpretation of these symbols will allow you to operate the product better and safer.

 

MAX 15

o

Summary of Contents for 151.37664


















Reviews: