13
Fig 3
ASSEMBLY
ALWAYS
inspect the sandpaper before installing.
DO NOT
use if broken or defective.
1. Unplug the sander.
INSTALLING THE SANDPAPER (See Fig. 3)
WARNING:
Your sander should
NEVER
be connected to the power source
when you are assembling parts, making adjustments, installing or removing
sandpaper, cleaning or when it is not in use. Disconnecting the sander will prevent
accidental starting, that could cause serious personal injury.
!
WARNING:
Failure to unplug the sander could result in accidental
starting causing possible serious personal injury.
!
NOTE:
Remove cyclonic dust box assembly when installing sandpaper.
ALWAYS
remember to reattach the cyclonic dust box assembly before beginning sanding
operation (see page 14, Fig. 4).
NOTE:
The sanding discs must line up with the 2 backing pads in order for the dust
collection feature of the sander to function properly.
NOTE:
For best adhesion, we recommend that you clean the backing pads and the
sanding discs backing occasionally by brushing them lightly with a small brush.
2. Align the sanding discs with the hook and loop backing pad.
3. Press the sanding discs against the backing pads as firmly as possible.
5-in.
Hook and Loop
Sanding Pads
Sander
5-in. Hook and Loop
Sanding Discs
(outer ring disc and inner spot disc)
12
DESCRIPTION cont.
This Random Orbit Sander has the following features cont.:
Fig 2
No-load Speed
Rating
Input
Orbit Diameter
Sanding Disc Size
Paper Type
12000 OPM orbits per minute
120 Volts, 60 Hz AC
2.7 Amps
1/8-inch
5-in. Diameter (outer ring disc and inner spot disc)
Hook and Loop Discs
5.
On/Off rocker switch
is conveniently located for easy control. Sealed to keep out
dust for long life.
6.
Hook and Loop Backing Pads
for easy attachment of hook and loop type sanding discs.
7.
High impact-resistant housing
helps protect tool from damage and reduces weight.
8.
Cyclonic Dust-Air Separator (CDS) Collection System
Dust Box features advanced
air flow design with centrifugal force dust extraction that separates the dust particles
from the air flow as they enter the box. The clean air then flows out of the box while the
dust particles are trapped inside. This system provides more efficient dust collection than
the standard dust bag system.
9.
Vac Adapter with Dual Dust Ports for Vac Hoses
Allows connection to 1
1
/4 or 2
1
/2-inch
vac hose and wet / dry vac (sold separately).
10.
Permanently lubricated bearings
for smooth operation and long life.
11. Includes rugged
storage/carry case.
Plam Grip Handle
with Comfor Grip
Cyclonic
Dust Box
5-in.
Hook and Loop
Backing Pads
On/Off
Rocker
Switch
Vac Adapter with
Dual Dust Ports for
Vac Hoses
PRODUCT SPECIFICATIONS
