4
Installation & Assembly
WARNING!
Before performing any maintenance, turn the compressor off, unplug from power source, bleed air
from tank and allow unit to cool. Personal injuries can occur from moving parts, electrical sources,
compressed air or hot surfaces. If unsure of assembly instructions or you experience difficulty in the
assembly contact a Sears or other qualified service dealer.
Assembly
1.
Remove air compressor, manual, air filter
assembly, and accessories from packaging.
2. Remove the plastic plug from the compressor
intake port. (see diagram below)
3. Install the filter in the compressor intake port.
(see diagram below)
4. Remove the oil fill cap from the crankcase
and fill until the oil reaches the top of the red
dot in the sight glass. Oil capacity is 2.7 oz.
(see below) Use SAE 30 Non-detergent Semi
Synthetic oil (API CG/CD heavy duty motor
oil). Under extreme cold weather conditions
use SAE-10 weight oil.
5. Replace the oil fill cap.
2
3
4
5