778-15437A
© 2019 24A-060
CRAFTSMAN and the CRAFTSMAN logo are trademarks of Stanley Black & Decker, Inc. or an affiliate thereof and are used under license.
A. Remove clips from handle brackets and
put lower handle into place over handle
brackets.
B. Insert carriage screws through upper hole
in lower handle from the inside and secure
with wing nuts.
A. Unfold and align upper handle with
lower handle.
B. Secure upper handle to lower handle with
carriage bolts and star knobs.
C. Slowly pull starter rope up from engine.
Slip starter rope into rope guide. Tighten
rope guide wing nut.
A. Slide hose adapter of hose assembly into
base adapter located on left front of the
Yard Vacuum.
B. Pull spring loaded pin out on base and
align pin with first hole (closest to end of
tube) in hose adapter. Release pin to lock
hose in place.
A. Lay hose tubing in curved end of
handle next to chipper chute and
into hose cradle.
B. Snap hose handle first into upper
hose handle bracket and then into
lower hose handle bracket.
Hose
Extension
Recoil
Starter
Hose
Assembly
Hose
Handle
Gasoline
Fill
Chipper
Chute
Nozzle Height
Adjustment Lever
Nozzle
Nozzle/Hose
Vac Lever
B
A
B
C
A
B
1
Align pin
with this
hole.
A
B
A
A
B
1
3
2
4
Fast Start Guide - Assembly
READ AND UNDERSTAND ALL INSTRUCTION, WARNING AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR’S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING.
Need Help?
www.CRAFTSMAN.com or Call 1-888-331-4569
