MAINTENANCE AND REPAIR INSTRUCTIONS
MAINTENANCE SCHEDULE
Perform these required maintenance procedures at the fre-
quency stated in the table. These procedures should also
be a part of any seasonal tune-up.
NOTE: Maintenance, replacement, or repair of the
emission control devices and system may only be
performed by a Sears or other qualified service
dealer.
NOTE:
Maintenance, replacement, or repair of the emis-
sion control devices and system may be perormed
by a Sears or other qualified service dealer.
To prevent serious
injury, never perform
maintenance or repairs with unit running.
Always service and repair a cool unit.
Disconnect the spark plug wire to ensure that
the unit cannot start.
WARNING:
A good preventive maintenance program of regular inspection and care will increase life and improve performance of your
chain saw. This maintenance checklist is a guide for such a program.
Cleaning, adjustment, and part replacement may be required, under certain conditions, at more frequent intervals than
those indicated.
CUSTOMER RESPONSIBILITY
CHECK FOR LOOSE SCREWS/
NUTS/BOLTS
CLEAN OR REPLACE THE FILTER
REPLACE FUEL FILTER
REPLACE SPARK PLUG
INSPECT SPARK ARRESTER SCREEN
INSPECT FUEL HOSES
INSPECT VACUUM TUBES
ITEM
BEFORE EACH USE
10
20
MAINTENANCE CHECKLIST
AFTER
EACH USE
HOURS OF
OPERATION
13
