9
•
DO NOT
attempt to aerate if ground is too wet, or
muddy.
• Due to possible small rocks and gravel which can be
present in aerated soil plugs, it is recommended that
the plugs be raked; otherwise damage to the lawn
mower blades may arise, especially when reel type
mowers are used.
• To increase the depth of plugger point penetration,
up to 140 lbs. of weight, such as bags of sand or (4)
concrete blocks, may be added to the tray. The weight
can be secured to the tray with ties or straps fastened
to the front and rear of the tray. Fasten so that the ties
or straps cannot become entangled on rotating parts.
See figure 13.
CAUTION:
To prevent injury, dismount
from the tractor to raise or lower
aerator containing added weight.
FIGURE 13
Service Dates
Check for loose fasteners
X
Cleaning
X
Lubrication
X
MAINTENANCE SCHEDULE
Fill in dates as you
complete regular service.
Bef
ore each use
After each use
Ev
ery season
Bef
ore stor
age
CUSTOMER RESPONSIBILITIES
• Read and follow the maintenance schedule and the maintenance procedures listed in this section.
CHECK FOR LOOSE FASTENERS
•
Before each use make a thorough visual check of the
plug aerator for any bolts and nuts which may have
loosened. Retighten any loose bolts and nuts.
MAINTENANCE
LUBRICATION
•
Lubricate wheels as needed.
• Oil the spool assemblies and shaft as needed.
CLEANING
•
Clean dirt off of aerator knives after each use.
BE
CAREFUL OF SHARP EDGES
WHEN CLEANING
.
STORAGE
SERVICE AND ADJUSTMENTS
• Plugger points can periodically be sharpened with a
small grinder to maintain good penetration. Points
should be removed to sharpen. Follow original angle
and contour of points when grinding.
• Clean the aerator and store in a dry area. Coat
exposed metal with light oil to prevent rust.
