background image

 

For best results and more efficient power, it is recommended that you operate your inflator with your 
VEHICLE‟S ENGINE RUNNING, making absolutely sure you are outside or in an open, well-ventilated 
area and NOT INSIDE A CONFINED AREA, SUCH AS A GARAGE as bodily injury or asphyxiation 
resulting in death could occur. 

ALWAYS ALLOW FOR PROPER VENTILATION. 

 Most vehicle 12 Volt 

power outlets will operate with vehicle ignition off; however, some vehicles require that the ignition be 
turned on.

 

 

IMPORTANT SAFETY INSTRUCTIONS 

 

Save these instructions 

 

Improper operation or maintenance of this product could result in serious injury and property 
damage.  Read and understand all warnings and operation instructions before using this 
equipment. 
 
 

HAZARD 

 

WARNING:

  

Risk of explosion or fire

 

 

What Could Happen 

How To Prevent It 

It is normal for electrical contacts 

within the motor 

to spark. 

Always 

operate the inflator in a 

well ventilated 

area free of combustible materials, gasoline, or 
solvent vapors.

 

If

 electrical 

sparks 

from inflator 

come into contact with 
flammable vapors, they may 
ignite, causing fire or explosion. 

Store flammable materials in a secure location 
away from inflator. 

Restricting 

any of the 

inflator 

ventilation openings

 will cause 

serious overheating and 

could 

cause fire. 

Never place objects against or on top of inflator.  
Operate inflator

 in an open area 

at least 12 

inches away from

 any 

wall or obstruction 

that 

would restrict the flow of fresh air to the ventilation 
openings.   

Do not operate unit in any confined area. 

Unattended operation 

of this 

product 

could result in personal 

injury or property damage.  To 
reduce the risk of fire, do not 
allow the inflator to operate 
unattended. 

Always remain in attendance 

with the product 

when it is operating.  

Always disconnect power by 

moving on/off switch to the off position and 
unplug the power cord. 

 
 
 
 

 
 
 
 
 
 

 
 
 

3

 

Summary of Contents for 75114















Reviews: