10
NOTES:
Accuracy specifications consist of two elements:
•
(% reading) – This is the accuracy of the measurement circuit.
•
(+ digits) – This is the accuracy of the analog to digital
converter.
Accuracy is stated at 65
o
F to 83
o
F (18
o
C to 28
o
C) and less than
75% RH.
Diode Test
Test current: 0.3mA max., Open
circuit voltage: 1.5V DC typ.
Continuity Check
Audible signal will sound if the
resistance is less than 100
!
Temperature Sensor
Requires type K thermocouple
Input Impedance
10M
!
(VDC & VAC)
AC Bandwidth
50 / 60Hz
Display
4000 count (0 to 3999 digits) backlit
LCD
Overrange indication
For all functions “OL” is displayed
(Note: For ACV measurements only,
an audible beep will also sound)
Auto Power Off
After 15 minutes (approximately) of
inactivity
Polarity
No indication for positive; Minus (-)
sign for negative
Measurement Rate
2 times per second, nominal
Low Battery Indication
“ ”
is displayed if battery voltage
is critically low
Battery
Two (2) 1.5V ‘AAA’ batteries
Fuses
mA,
"
A ranges: 500mA/250V fast
blow;
’A’ range: 10A/250V fast blow
Operating Temperature
32ºF to 122ºF (0ºC to 50ºC)
Storage Temperature
-4
o
F to 140
o
F (-20
o
C to 60
o
C)
Operating Humidity
<70% RH
